NASA Home Jet Propulsion Laboratory California Institute of Technology NASA Portal Follow this link to skip to the main content
JPL Home Page JPL - Earth JPL - Solar System JPL - Stars & Galaxies JPL - Technology
Home Page Mission Gallery Education News About Us Internal

Gallery introduction
Latest MISR imagery
A collection of MISR imagery
Suggest an image
MISR instrument
AirMISR instrument
AirMISR imagery

Photographs of the MISR Instrument
MISR at the JPL Space Simulator
JPL image P-28825A 700 x 473, 75 KB jpg  
The MISR instrument is shown seated on the end bell of the thermal vacuum chamber in JPL's 3-meter Space Simulator Facility. Testing was completed in mid-May 1997, and verified the instrument performance over a range of temperatures.

Photograph by Barbara Gaitley, JPL image P-28825A

 The MISR instrument is shown seated on the end bell of the thermal vacuum chamber in JPL's 3-meter Space Simulator Facility. Testing was completed in mid-May 1997, and verified the instrument performance over a range of temperatures.<p><i>Photograph by Barbara Gaitley, JPL image P-28825A.
 
MISR in Thermal Blanket
JPL image P-28315A 700 x 538, 183 KB jpg 1046 x 804, 2.5 MB tif
The MISR instrument, covered with its protective gold blanket, is seen here as it was being tested in a simulated space environment at the Jet Propulsion Laboratory in December 1996. The instrument will look much like this when it is flying in space. Earth would be toward the top of the picture. The black cover for the camera view ports is open, and for this test, an incandescent light source placed over the instrument (curved metal object with cables at top-center of the box) provides a target for the cameras to image. Control equipment for the test electronics appears in the foreground.

 The MISR instrument, covered with its protective gold blanket, is seen here as it was being tested in a simulated space environment at the Jet Propulsion Laboratory in December 1996. The instrument will look much like this when it is flying in space. Earth would be toward the top of the picture. The black cover for the camera view ports is open, and for this test, an incandescent light source placed over the instrument (curved metal object with cables at top-center of the box) provides a target for the cameras to image. Control equipment for the test electronics appears in the foreground.
 
MISR Cutaway Drawing
JPL image P-44988 600 x 473, 72 KB jpg 1800 x 1419, 7.7 MB tif
This is an artist's rendition of the MISR instrument in cutaway view. The back ends of the 9 MISR cameras appear as yellow cylinders. In this orientation, MISR would look down toward Earth.

 This is an artist's rendition of the MISR instrument in cutaway view. The back ends of the 9 MISR cameras appear as yellow cylinders. In this orientation, MISR would look down toward Earth.
 
MISR Optical Bench Assembly
JPL image P-28109A 650 x 636, 233 KB jpg 1810 x 1770, 9.6 MB tif
This is the "science part" of the MISR instrument, which includes the cameras and calibration equipment. The photograph was taken in October 1996, as MISR was being assembled. Subsequently, the parts that supply power, communications, and temperature control were added. The entire package was then encased in a protective housing, which was covered with highly reflecting thermal blankets.

 This is the
 
"Family Portrait" of the 9 MISR Cameras
JPL image P-28033A 700 x 514, 146 KB jpg 1888 x 1387, 7.9 MB tif
Here are the 9 MISR cameras, plus one of three "spare" cameras, in 1996 before they were attached to the MISR Instrument. The two cameras designed to look at the steepest angles, which are known as the the "D forward" and "D aftward" cameras, have the longest telescopes. One of the spare cameras was used to build AirMISR, an instrument designed to fly in an airplane, to help check the data from the spacecraft instrument.

 Here are the 9 MISR cameras, plus one of three 'spare' cameras, in 1996 before they were attached to the MISR Instrument. The two cameras designed to look at the steepest angles, which are known as the the 'D forward' and 'D aftward' cameras, have the longest telescopes. One of the spare cameras was used to build AirMISR, an instrument designed to fly in an airplane, to help check the data from the spacecraft instrument.
 
MISR Camera with Support Electronics
JPL image P-28033B 700 x 459, 75 KB jpg 1913 x 1432, 7.3 MB tif
This is one of the 9 MISR cameras completely assembled, together with its support electronics. Each camera is a self-contained unit designed to be tested and calibrated independently before it was added to the MISR support assembly, or Optical Bench. To get a sense of scale, consider the small rectangular box attached to the side of the camera barrel. It is a part of the Focal Plane Assembly, and is about 4 inches long. The camera in this image is one of the MISR "A" cameras, which have the shortest telecopes, and are designed to look nearly dorectly down toward Earth.

 This is one of the 9 MISR cameras completely assembled, together with its support electronics. Each camera is a self-contained unit designed to be tested and calibrated independently before it was added to the MISR support assembly, or Optical Bench. To get a sense of scale, consider the small rectangular box attached to the side of the camera barrel. It is a part of the Focal Plane Assembly, and is about 4 inches long. The camera in this image is one of the MISR 'A' cameras, which have the shortest telecopes, and are designed to look nearly dorectly down toward Earth.
 
Focal Plane Assembly
JPL image P-23831A 700 x 499, 123 KB jpg 1852 x 1321, 7.3 MB tif
This is an actual detector from one of the MISR cameras (disk-shaped object with slit.) It is attached to a rectangular "camera head" electronics package that is about 4 inches long. The cover for the electronics package is in the background.

Beneath the detector slit are strips of light-sensitive solid-state material. Each strip is divided into 1,504 spots called "pixels," which produce line after line of a MISR image as the sweep of the spacecraft orbit carries MISR around Earth. (For this reason, MISR is called a "push- broom" camera.) There are 4 closely spaced strips of pixels in each detector, one strip for each of the MISR color bands. Since there are 9 cameras altogether, MISR can produce 36 images simultaneously when all the detectors are collecting data.

 This is an actual detector from one of the MISR cameras (disk-shaped object with slit.) It is attached to a rectangular 'camera head' electronics package that is about 4 inches long. The cover for the electronics package is in the background. Beneath the detector slit are strips of light-sensitive solid-state material. Each strip is divided into 1,504 spots called 'pixels,' which produce line after line of a MISR image as the sweep of the spacecraft orbit carries MISR around Earth. (For this reason, MISR is called a 'push- broom' camera.) There are 4 closely spaced strips of pixels in each detector, one strip for each of the MISR color bands. Since there are 9 cameras altogether, MISR can produce 36 images simultaneously when all the detectors are collecting data.

Return to top

Next: AirMISR Instrument




USA GOV website - Your first click to the U.S. Government. NASA Contact Us: Ask MISR
Last Updated:

Copyright © 1996-2006, California Institute of Technology
ALL RIGHTS RESERVED
Based on U.S. Government sponsored research